3D print the Garritse–Doremus–Westervelt House
A free, printable model of the Garritse–Doremus–Westervelt House and the lawn, paths and houses around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About the Garritse–Doremus–Westervelt House
Set in Weasel Brook Park at 794 Park Drive, in the city of Clifton, Passaic County, New Jersey, this historic Dutch Colonial farmhouse is built of stone. It is also called the Vanderhoef–Westervelt House. Dating from about 1785, it is one of the oldest houses in the county. The Historic American Buildings Survey documented it in 1939, and on March 20, 2023, it was listed in the National Register of Historic Places for its architectural importance.
Around 1720, Gilbert Vanderhoef received the land as a gift from John E. Vreeland, his wife's father, and built a farmhouse and a gristmill powered by Weasel Brook. Garret Garritse bought the property in 1736, and after he died in 1737 it passed to his son Peter Garritse. Peter and Jane, his wife, put up the northeastern section of the house around 1785. Ralph Doremus bought it in 1805 and sold it in 1825 to Sophia Westervelt. Sophia and her husband David built the southwestern section and a kitchen wing around 1830. In 1905 Edward Jewett bought it as an investment, and the Passaic County Park Commission acquired it in 1931.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 2 mm | 1:3,750 |
| 200 mm | 3 mm | 1:3,000 |
| 256 mm | 4 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Dormers and chimneys
- A row of small dormers and two chimneys rise from the long roof. They are tiny at this scale: Print friendly adapts them, while a larger print or Full detail keeps them, ideally with 0.12 mm layers.
- Thin porch posts
- The porch on the long side has slender posts and rails. Print slowly and use a larger print size to keep them from breaking or blurring.
- One piece with the ground
- The Garritse–Doremus–Westervelt House is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Garritse–Doremus–Westervelt House takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
The Garritse–Doremus–Westervelt House is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Garritse–Doremus–Westervelt House STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. The Garritse–Doremus–Westervelt House grows with the print: about 2 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
