3D print Hanking Center
A free, printable model of Hanking Center in Shenzhen, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 359 m
- On a 160 mm print
- 98 mm
- Scale
- 1:3,750
359 m of Hanking Center, 98 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall tower details
A tall tower can have thin parts near the top. For a small print, set Landmark detail to Print friendly so those parts are adapted to the scale; Full detail suits a large print or a fine nozzle.
- Layers for the tower
Layers of 0.12 to 0.16 mm keep the tall shaft's vertical edges crisp; print slowly with steady cooling on the upper floors.
- One piece with the ground
Hanking Center is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Hanking Center takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Hanking Center
Hanking Center rises in Shenzhen, Guangdong, China, as a 358.9-meter (1,177.5 ft) skyscraper with 65 floors above ground. Construction started in 2013 and the tower was finished in 2018. No other building with a detached core is taller.
The tower's core stands apart from the main floors. Design firm Morphosis moved circulation, services and amenities into an exterior core to maximize floor plan flexibility, and linked that core to the main tower by glass skybridges and steel braces.
About this model
Hanking Center is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
