3D print SEG Plaza
A free, printable model of SEG Plaza among the surrounding city buildings of Shenzhen, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 292 m
- On a 160 mm print
- 97 mm
- Scale
- 1:3,750
292 m of SEG Plaza, 97 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Print the tower tall
A high-rise keeps its upper floors and facade detail better at a larger print size; 0.12 to 0.16 mm layers keep the vertical edges clean.
- One piece with the ground
SEG Plaza is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. SEG Plaza takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About SEG Plaza
SEG Plaza is a skyscraper where Shennan Road meets the Huaqiangbei electronics market in Shenzhen, China. It was completed in 2000. Its original antenna brought the total height to 356 meters (1,168 ft), though the mast has since been removed; the roof itself stands at 292 meters (958 ft). The building has 71 stories above ground, or 72 counting the helipad. It ranked 21st in China and 72nd worldwide.
SEG Plaza is the home of the Shenzhen Electronics Group (SEG), which gives the building its name. Its first ten floors are given over to the SEG Electronics Market, a major international market for electronic components and finished products. Floors 13 through 69 are offices, while the observation floor on level 69 has been turned into office space.
The structure combines a steel-reinforced concrete core with outer steel tube columns filled with concrete, and it has four basement levels. The Chinese firm Hua Yi Designing Consultants Limited designed the tower. On May 18, 2021, the building shook and was evacuated; authorities attributed the shaking to wind vibrating a rooftop mast, which was subsequently removed and replaced.
About this model
SEG Plaza is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
