3D print the Hanson Place Seventh-day Adventist Church
A free, printable model of the Hanson Place Seventh-day Adventist Church, with its columned entrance and pedimented roof, among nearby streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Columns and pediment
The four columns of the entrance portico and the steep pediment above them are the finest details. Use Full detail at a larger size to keep the columns, or Print friendly to adapt them for a small print.
- One piece with the ground
The Hanson Place Seventh-day Adventist Church is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Hanson Place Seventh-day Adventist Church takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Hanson Place Seventh-day Adventist Church
In Brooklyn's Fort Greene neighborhood, at 88 Hanson Place, stands the Hanson Place Seventh-day Adventist Church, between South Oxford Street on one side and South Portland Avenue on the other. The building dates from 1857–60 and was first the Hanson Place Baptist Church. George Penchard was the designer, and the style is Early Romanesque Revival.
The church is built of brick, on a foundation of brick covered in stucco. Four Corinthian columns hold up a steeply pitched pediment over the entrance portico, and the side facade on South Portland has pilasters. Restoration work on its interior and exterior took place in the 1970s. The congregation has been Seventh-day Adventist since 1963. New York City designated the church a landmark in 1970, and the National Register of Historic Places listed it in 1980. The noted hymn "Hanson Place", written by Robert Lowry in 1864, was named after the church.
About this model
The Hanson Place Seventh-day Adventist Church is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
