3D print the Herbert N. Straus House
A free, printable model of the Herbert N. Straus House and the buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Herbert N. Straus House in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 12 mm
- Scale
- 1:3,750
12 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Fine facade details
The facade carries small window and trim details. Print friendly adapts them to the print scale; Full detail with a larger print and 0.12–0.16 mm layers keeps more of them crisp.
- One piece with the ground
The Herbert N. Straus House is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Herbert N. Straus House takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Herbert N. Straus House
A big townhouse at 9 East 71st Street, in Manhattan's Upper East Side, is known as the Herbert N. Straus House. It sits midway along the block's north side, east of Fifth Avenue. Horace Trumbauer designed the exterior, which was completed in 1932. A roof extension followed in 1977.
The limestone exterior is distinguished by an oak door 15 feet (4.6 m) high and large arched windows, and a heated sidewalk runs in front of the house. In the late 1980s the house was believed to cover 21,000 square feet. By 2003 it had grown to 51,000 square feet across nine floors.
Writer Vicky Ward described the house in 2003 as far out of scale with the four- and five-story buildings beside it, closer to an institution than to a house. She added that it was thought to be Manhattan's largest private home.
About this model
The Herbert N. Straus House is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Outside the United States this design may still be protected; check the rules where you sell.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





