3D print the Hercules Monument (Kassel)
A free, printable model of the Hercules Monument, an octagonal base with a slim pyramid and a small statue on top, set on a wooded hillside with paths around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Hercules Monument (Kassel) in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 71 m
- On a 160 mm print
- 20 mm
- Scale
- 1:3,750
71 m of the Hercules Monument (Kassel), 20 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slim pyramid and a tiny statue
The narrow pyramid ends in a very small statue at the top. Print slowly with good cooling for this thin tip; Print friendly adapts it to the print scale, while Full detail keeps it as modeled.
- Dense detail around the base
The octagon has rows of small windows, and the base is ringed with irregular rocky shapes. A layer height of 0.12 to 0.16 mm and a larger print size keep these details crisp.
- One piece with the ground
The Hercules Monument (Kassel) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Hercules Monument (Kassel) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Hercules Monument (Kassel)
Kassel, Germany, is home to the Hercules Monument, a landmark in Bergpark Wilhelmshöhe in northern Hesse. Hercules himself is a copper statue of the ancient Greek demigod Heracles, set atop a pyramid that sits on an octagon. These elements were built at different times, and the name now covers the whole monument. No point in the Wilhelmshöhe Bergpark is higher. It sits in an artificial hollow on the Karlsberg, a hill 526 m (1,726 ft) in elevation.
In total the monument stands 70.5 m (231 ft) tall, made up of an octagon of 32.65 m (107.1 ft), a pyramid of 29.60 m (97.1 ft) and a statue of 8.25 m (27.1 ft). Work on the Bergpark started in 1696, and the statue took shape between 1701 and 1717, based on a design by the Italian Giovanni Francesco Guerniero. A total of 520 steps lead to the top. Tuff from nearby quarries forms both the octagon and the cascades; the soft stone weathers quickly.
Below the monument, a stone structure shaped like a staircase forms the cascades, which are 250 m (820 ft) long. Water leaves the monument and flows past the cascades, Steinhöfer's waterfall and the devil's bridge, then down the aqueduct to a lake, where a roughly 50 m (160 ft) fountain finishes the show. Reservoirs and underground pipes supply natural pressure. World Heritage status followed in 2013 for the monument and the Bergpark around it.
About this model
The Hercules Monument (Kassel) is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





