3D print Hobart Town Hall
A free, printable model of Hobart Town Hall and the larger city buildings and streets around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Hobart Town Hall
Hobart Town Hall, a sandstone landmark, is where the City of Hobart council is based. It holds council meetings, and its auditorium can be hired by the public. Public tours run from time to time, showing the ornate Victorian auditorium and the organ, played since 1870.
Building began in 1864, when the foundation stone was laid on April 14, a public holiday marked by a parade. Completion came in September 1866, celebrated with a further public holiday and a gala ball. Henry Hunter's design took some inspiration from the Palazzo Farnese in Rome. The hall and Franklin Square share the site of the old government house.
Its original occupants were the council chambers, the municipal court, police offices and the State Library of Tasmania, and these stayed for nearly fifty years. The organ, made by J. W. Walker of London, was opened on March 17, 1870, and is reckoned the second finest in Australia. By 1925 the portico had degraded until it was declared unsafe, requiring major restoration.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 7 mm | 1:3,750 |
| 200 mm | 8 mm | 1:3,000 |
| 256 mm | 11 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Portico, chimneys and roof details
- The portico columns, small chimneys and rooftop details are the finest parts. Print friendly merges the smallest; Full detail keeps them at larger print sizes and a finer layer height.
- One piece with the ground
- Hobart Town Hall is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Hobart Town Hall takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Hobart Town Hall is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Hobart Town Hall STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Hobart Town Hall grows with the print: about 7 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
