3D print Hotel Paris
A free, printable model of Hotel Paris and the mid-rise buildings packed around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 19 mm
- Scale
- 1:3,750
19 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Notched, stepped crown
The upper floors step back and end in a crown with many small notches and ledges. Print slowly with good cooling, and use a larger print size or Full detail to keep them sharp.
- One piece with the ground
Hotel Paris is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Hotel Paris takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Hotel Paris
On Manhattan's Upper West Side stands Hotel Paris, a historic residential building. It was completed in 1931 and designed in the Art Deco style by Sugarman & Berger, and it has 23 floors above ground. Inside are 175 apartments, along with a gym and pool.
Westbrook Partners acquired the building at US$85.8 million in 2007. David Bistricer and the Rieder family bought it in 2010 for US$72.36 million. In 2013 they sold it on to Crescent Heights at $123 million, and the company refurbished the apartments. Laurence Gluck of Stellar Management bought it in 2015 from Bruce Menin of Crescent Heights for US$150 million.
About this model
Hotel Paris is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
