3D print the Jamaica Chamber of Commerce Building
A free, printable model of this stepped brick tower and the dense Jamaica blocks around it in Queens, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 10 mm
- Scale
- 1:3,750
10 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Stepped upper stories
The upper stories step back, and the top carries a small pedimented temple and rooftop boxes. Print friendly adapts the small top details to the print scale; use Full detail on a larger print to keep them.
- One piece with the ground
The Jamaica Chamber of Commerce Building is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Jamaica Chamber of Commerce Building takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Jamaica Chamber of Commerce Building
Jamaica, a section of the borough of Queens in New York City, is home to the Jamaica Chamber of Commerce Building, a historic office building. George W. Conable designed it in 1928. The building rises ten stories on a T-shaped plan and follows the Colonial Revival style.
Conable took 19th-century American and British precedents as the basis for the facade. Behind it is a steel frame, faced with red brick and detailed in stone and terra cotta. A terra cotta base one story high is topped by a section six stories tall, the eighth and ninth stories step back, and a one-story pedimented temple forms the top. The National Register of Historic Places listed the building in 1983. Its facade is also a New York City Landmark, designated in 2010.
About this model
The Jamaica Chamber of Commerce Building is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
