3D print King Manor
A free, printable model of King Manor, an L-shaped house with a gambrel roof, porches and chimneys, standing in a green park with paths around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Chimneys and porch columns
Several slender chimneys rise from the roof, and thin columns hold up the porches. Print friendly adapts thin parts like these to the print scale; Full detail keeps them for larger prints.
- Fine texture on a broad roof
The wide gambrel roof and the walls carry a fine surface texture. A layer height of 0.12 to 0.16 mm and a larger print size help it stay crisp.
- One piece with the ground
King Manor is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. King Manor takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About King Manor
King Manor, known too as the Rufus King House, stands in Jamaica, Queens, at Jamaica Avenue and 150th Street. This two-story building anchors Rufus King Park, a public park of 11.5 acres (4.7 ha) that keeps a piece of the old estate belonging to Rufus King, who was a U.S. Founding Father. Construction dates to about 1730, with additions in 1755 and during the 1800s, and the design mixes Federal, Georgian and Greek Revival touches.
King acquired the house and the land around it in 1805 and enlarged it into a 17-room mansion, where he lived until his death in 1827. His family stayed until 1896, when his granddaughter Cornelia King died. In 1897 the then-independent village of Jamaica bought the house and what remained of the land and turned them into a public park. Once Jamaica joined New York City the following year, NYC Parks assumed control.
The house has several sections set roughly in an L plan. Its slightly asymmetrical facade has frame shingles and a Dutch portico under a gambrel roof. The first floor holds an ornate parlor, a library and a dining room, with bedrooms on the second and third floors. King Manor is a National Historic Landmark. The house, its interiors and the park also hold New York City landmark designation.
About this model
King Manor is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
