A white 3D print of the Kitchen, Montross & Wilcox Store, a long low building with a railed roof, tucked between much taller buildings in dense city blocks.

3D print the Kitchen, Montross & Wilcox Store

A free, printable model of the Kitchen, Montross & Wilcox Store among the tall buildings of lower Manhattan, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Kitchen, Montross & Wilcox Store model, North view North
  • Kitchen, Montross & Wilcox Store model, East view East
  • Kitchen, Montross & Wilcox Store model, South view South
  • Kitchen, Montross & Wilcox Store model, West view West

© OpenStreetMap contributors

The model you print

Kitchen, Montross & Wilcox Store in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
9 mm
Scale
1:3,750

9 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Slim building in a dense block

    The model is a long, narrow building with a railed rooftop, surrounded by much taller neighbors. A larger print size keeps its facade columns and rooftop railing from washing out.

  2. One piece with the ground

    The Kitchen, Montross & Wilcox Store is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  3. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  4. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Kitchen, Montross & Wilcox Store takes the building color.

  5. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Kitchen, Montross & Wilcox Store

The Kitchen, Montross & Wilcox Store is on Leonard Street, at number 85, in the block between Broadway and Church Street, in Manhattan's TriBeCa area, in New York City. It dates from 1861 and was put up in an Italianate style, for a company that dealt in dry goods.

James Bogardus's ironworks supplied the cast iron for the facade, and the building is among the few survivors for which that is true. The columns are called "sperm-candle style", a comparison to candles made of spermaceti. Its design mixes elements inspired by classical buildings with the lightness, openness and verticality typical of cast-iron architecture. New York City designated it a landmark in 1974, and the National Register of Historic Places followed in 1980. The Tribeca East Historic District includes it.

About this model

The Kitchen, Montross & Wilcox Store is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in New York

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits