3D print Komagome Station
A free, printable model of Komagome Station, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Low station profile
The station sits low in the model, so its roofline carries most of the shape. Print friendly adapts the thinnest parts to the print scale; a larger print keeps the edges clearer.
- One piece with the ground
Komagome Station is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Komagome Station takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Komagome Station
Komagome Station is a rail station in Toshima, in Tokyo, Japan. It is run by the East Japan Railway Company, or JR East, and by Tokyo Metro. The circular Yamanote Line and the Tokyo Metro Namboku Line both serve it. Each of the two operators has one island platform, and each of those platforms serves two tracks.
The station opened on November 15, 1910, when Japanese Government Railways made it a stop on the Yamanote Line. On April 13, 1945, an air raid burned down the station building during World War II. The Yamanote Line facilities passed to JR East on April 1, 1987, after Japanese National Railways was privatized. The Namboku Line station opened on November 29, 1991, under the Teito Rapid Transit Authority, and passed to Tokyo Metro on April 1, 2004.
During fiscal 2013, chest-height platform edge doors went in on the Yamanote Line platforms. Station numbering was introduced in 2016, with Komagome assigned JY10. Rikugien Garden and Kyu-Furukawa Gardens can both be reached on foot from the station. The station takes its name from the Komagome area of Toshima.
About this model
Komagome Station is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
