3D print Ōtsuka Station
A free, printable model of Ōtsuka Station, a low station with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Low station profile
The station is low in the model, so its roofline and platform edges carry the shape. Print friendly adapts the thinnest parts to the print scale; a larger print keeps them clearer.
- One piece with the ground
Ōtsuka Station is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Ōtsuka Station takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Ōtsuka Station
Ōtsuka Station is a rail station in Toshima, in Tokyo, Japan, run by East Japan Railway Company, or JR East. Ōtsuka-ekimae Station, a Tokyo Sakura Tram stop, sits underneath; Toei, the Tokyo Metropolitan Bureau of Transportation, runs the tram line. The circular Yamanote Line serves the main JR East station.
The station has an elevated island platform that serves the two Yamanote Line tracks, along with a staffed Midori no Madoguchi ticket office. Platform edge doors at chest height came into use on the Yamanote Line platforms from April 20, 2013. Station numbering arrived in 2016, when Ōtsuka was assigned JY12. The station opened on April 1, 1903. The wooden building on the south side came down in 2009. The area also holds Shin-ōtsuka Station, on the Marunouchi Line of Tokyo Metro. Sugamo Junior & Senior High School, Sugamo Police Station and Minami-Ōtsuka Hall are nearby too.
About this model
Ōtsuka Station is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
