A white 3D print of the Kyffhäuser Monument, a tall stepped tower with a domed top above a walled terrace, on a hillside with a winding road and a few buildings nearby.

3D print the Kyffhäuser Monument

A free, printable model of the Kyffhäuser Monument, its tall stepped tower and walled terraces on a green hillside, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Kyffhäuser Monument model, North view North
  • Kyffhäuser Monument model, East view East
  • Kyffhäuser Monument model, South view South
  • Kyffhäuser Monument model, West view West

© OpenStreetMap contributors

The model you print

Kyffhäuser Monument in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

Real height
81 m
On a 160 mm print
23 mm
Scale
1:3,750

81 m of the Kyffhäuser Monument, 23 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Tall tower and crown

    The tower narrows toward a domed top with a small lantern. Print friendly adapts these thin top parts to the print scale; a 0.12 mm layer height and slower printing keep the top crisp.

  2. Statues and wall crenellations

    The horse-and-rider statue, the figures on the terrace and the notched wall tops are small details. Full detail keeps them, and a larger print size gives them more room.

  3. One piece with the ground

    The Kyffhäuser Monument is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Kyffhäuser Monument takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Kyffhäuser Monument

In the Kyffhäuser mountain range of Thuringia, Germany, the Kyffhäuser Monument, also called the Barbarossa Monument, honors Emperor William. Work ran from 1890 to 1896, and it was raised on the remains of medieval Kyffhausen Castle, close to Bad Frankenhausen. Architect Bruno Schmitz designed it. Only two monuments in Germany are bigger, and Schmitz designed both.

In total the monument is 81 m (266 ft) tall, and it sits on a long outcrop, 800 m (2,600 ft) in length, of the eastern Kyffhäuser range, at 420 m (1,380 ft) elevation. A tower of 57 m (187 ft) carries the equestrian statue of Emperor William I and ends in a very large imperial crown. A stairway of 247 steps climbs to a platform where the view runs north to the Harz mountains and south to the Thuringian Forest.

On the east side, a small stone quarry framed by terraces is the backdrop for a sandstone figure of Emperor Frederick Barbarossa, 6.5 m (21 ft) high, made by Nikolaus Geiger. For the walls and towers, Schmitz took Romanesque elements from Hohenstaufen castles of the 12th and 13th centuries. The castle remains include a well 176 m (577 ft) deep, reported to be the deepest castle well in the world.

About this model

The Kyffhäuser Monument is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits