3D print Liberty Towers, Jersey City
A free, printable 3D model of the two curved Liberty Towers rising from one shared base, with the taller buildings and streets around them, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Liberty Towers, Jersey City
In Jersey City, New Jersey, the apartment complex Liberty Towers, also called Liberty View Towers, has two buildings: Liberty Towers East and Liberty Towers West. Both were built from 2001 to 2003 and stand 380 ft (120 m) tall. The complex has 648 residential units, and architect Jordan Gruzen designed it.
A shared podium carries both towers; it serves for parking and holds a lobby, with a leisure deck for tenants on top. The S. A. Wald Company Building made way for the complex when it was demolished, and the complex was originally named Liberty View Towers. The buildings are postmodern in style and are made of masonry, glass and concrete. The complex stands at the center of the rebuilt downtown area, with access to trains.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 32 mm | 1:3,750 |
| 200 mm | 40 mm | 1:3,000 |
| 256 mm | 51 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Twin towers on one podium
- Both towers share a wide podium, so the print stays joined at the base. The towers are tall and curved, so print slowly with good cooling.
- Vertical fins on the faces
- Vertical fins and curved ends give the faces a ribbed look. Print friendly adapts the fins to your print scale; Full detail keeps them, which suits a larger print.
- One piece with the ground
- Liberty Towers, Jersey City is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Liberty Towers, Jersey City takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Liberty Towers, Jersey City is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Liberty Towers, Jersey City STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Liberty Towers, Jersey City grows with the print: about 32 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
