3D print the Mandalay Bay Convention Center
A free, printable model of Mandalay Bay Convention Center, a cluster of wide, low halls with finely banded roofs, beside a curved-wing tower and wide roads, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 7 mm
- Scale
- 1:7,500
7 mm tall on a 160 mm print
Make this print opens the generator on a 1200 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Wide, low halls
The halls are very wide and low, so most of the model is flat roof. Choose a larger print size to keep the fine roof lines readable.
- Fine bands across the roofs
Many thin parallel bands run across the roofs. Layers of 0.12–0.16 mm keep them crisp; Print friendly adapts them to the print scale, and Full detail keeps every band.
- One piece with the ground
The Mandalay Bay Convention Center is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Mandalay Bay Convention Center takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Mandalay Bay Convention Center
The Mandalay Bay resort, in Paradise, Nevada, on the Las Vegas Strip, has a convention center attached to it, one of the largest in the U.S. Mandalay Resort Group, the resort's original owner, developed it for $236 million. Plans announced in April 2001 called for a facility on 16.5 acres southwest of the resort, adding 1,800,000 square feet (170,000 m2) to meeting and convention space of 190,000 square feet (18,000 m2) already there. That would exceed the combined 1,600,000 square feet (150,000 m2) of the neighboring Venetian resort and its Sands Expo.
Work began in June 2001 but stopped for nearly six months because of the economic effects of the September 11 attacks. The structure topped out on July 11, 2002. On January 6, 2003, the center opened, offering 1,500,000 square feet (140,000 m2). The first event, the Aqua Show, was aimed at the pool and spa trade. The center has three floors, and its layout lets it be divided into 75 rooms. MGM Mirage acquired it, along with Mandalay Bay, in 2005.
A $66 million expansion announced in April 2014 added 900 underground parking spaces and 350,000 square feet (33,000 m2) of exhibit space. Building started in October 2014; by August 2015 the new space was open. Work on the older areas wrapped up in January 2016, when second-floor space became the Oceanside Ballroom, of 70,000 square feet (6,500 m2). Three kitchens provide catering for events.
About this model
The Mandalay Bay Convention Center is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
