3D print the Massalikoul Djinane Mosque
A free, printable model of the Massalikoul Djinane Mosque and the streets and low buildings around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About the Massalikoul Djinane Mosque
In Dakar, Senegal, stands the Massalikoul Djinane Mosque, known in French as Mosquée Massalikoul Djinane. President Abdoulaye Wade donated the land on which it stands in the early 2000s. The Consortium des Entreprises du Sénégal built it over roughly 15 years, and it opened on September 27, 2019. The construction cost was XOF 20 billion.
The mosque covers more than 10,000 square meters (110,000 sq ft), and it is the largest mosque in West Africa. Up to 10,000 worshipers fit inside the prayer hall, and another 20,000 can be accommodated in its sahn. The mosque has five minarets, each 80 m (260 ft) high, together with four wooden domes that are 28 m (92 ft) tall.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 22 mm | 1:3,750 |
| 200 mm | 27 mm | 1:3,000 |
| 256 mm | 35 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Five slender minarets
- Five tall, thin minarets with balconies rise around the domes. Layers of 0.12 to 0.16 mm keep their tips crisp, and printing slowly helps these tall, thin parts.
- Domes and arched windows
- A large central dome sits among smaller domes, with rows of arched windows along the walls. Print friendly adapts these small details to the print scale; Full detail keeps them, which suits a larger print.
- One piece with the ground
- The Massalikoul Djinane Mosque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Massalikoul Djinane Mosque takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
The Massalikoul Djinane Mosque is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Massalikoul Djinane Mosque STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. The Massalikoul Djinane Mosque grows with the print: about 22 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
