3D print the McVickar House
A free, printable model of the house with its stone base, porches and wide front staircase, on a lawn with the roads and houses around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Porches on thin posts
The porches stand on thin posts and have railings, with a wide front staircase. Print friendly adapts these thin parts; Full detail keeps them, best on larger prints.
- One piece with the ground
The McVickar House is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The McVickar House takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the McVickar House
Irvington, New York, is home to the McVickar House at 131 Main Street. The house has a wooden frame and dates to the middle of the 19th century. Its Greek Revival design later gained some Picturesque decorative touches. The National Register of Historic Places listed it in 2004.
John McVickar, an Episcopalian minister, built the house after settling in the area to live near his friend Washington Irving and to start a school. McVickar's son, the first pastor of the nearby Church of St. Barnabas, lived there. Only one house along Main Street in the village is older.
Consolidated Edison, the regional electric utility, eventually owned the property, and tenants rented the house until the 1990s. After extensive restoration, it became home to the Irvington Historical Society, which uses it for offices and as a museum. Among the exhibits is a piece of the first transatlantic telegraph cable.
About this model
The McVickar House is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
