3D print Mirante do Vale
A free, printable model of Mirante do Vale and the surrounding streets and buildings of downtown São Paulo, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Mirante do Vale in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 170 m
- On a 160 mm print
- 48 mm
- Scale
- 1:3,750
170 m of Mirante do Vale, 48 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall tower, thin layers
A tall tower prints best slowly, so each layer can cool. A layer height of 0.12–0.16 mm keeps fine vertical detail crisp, and a larger print keeps small details.
- One piece with the ground
Mirante do Vale is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Mirante do Vale takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Mirante do Vale
Mirante do Vale (Condomínio Mirante do Vale in Portuguese) is a mixed-use skyscraper 170 m (558 ft) tall, in São Paulo, Brazil, in the Vale do Anhangabaú area of Downtown São Paulo. Other names are Palácio W. Zarzur and Palácio Zarzur Kogan, both after its architects. It carried the name Palácio Zarzur Kogan until 1988. It has three entrances, on Prestes Maia Avenue, Pedro Lessa Square and Brigadeiro Tobias Street.
Construction took place from 1959 to 1966. It was São Paulo's tallest building for 54 years, until Platina 220 surpassed it in 2022. For Brazil as a whole it held the height record until 2014, when Millennium Palace in Balneário Camboriú overtook it. Because it sits in a valley, lower in the city than the Edifício Itália and the Altino Arantes Building, it is perceived as lower.
Waldomiro Zarzur and Aron Kogan, both Brazilian engineers, were its architects and structural engineers; they graduated from Mackenzie Presbyterian University's engineering school. At times the lattice of concrete and steel at the top carried big neon signs for brands including Fanta and Sharp; the signs have since been removed. From Viaduto do Chá, as well as Viaduto Santa Efigênia, it can be seen.
About this model
Mirante do Vale is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
