3D print One Prudential Plaza
A free, printable model of One Prudential Plaza and the surrounding streets and buildings in Chicago, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
One Prudential Plaza in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 76 mm
- Scale
- 1:3,750
76 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Thin parts near the top
Tall towers can have thin parts near the top. Print friendly adapts thin parts to the print scale; slow printing with cooling helps tall thin parts, and a 0.12–0.16 mm layer height keeps them crisp.
- One piece with the ground
One Prudential Plaza is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. One Prudential Plaza takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About One Prudential Plaza
Completed in 1955, One Prudential Plaza is a Chicago structure of 41 stories that used to be named the Prudential Building. It was built as the headquarters of Prudential's Mid-America company, and it was Chicago's first skyscraper since the Great Depression and the Second World War.
It was built over the Illinois Central Railroad on air rights, and it was the final building ever connected to the tunnel network of the Chicago Tunnel Company. On finishing, its roof was the highest in Chicago; the sole higher point was the statue of Ceres atop the Chicago Board of Trade. Its mast worked as a broadcast antenna for WGN-TV.
Naess & Murphy was the architect, a forerunner of the firm that became Murphy/Jahn Architects by way of C.F. Murphy & Associates. Two restaurants opened with the building; Stouffer's Top of the Rock, on the 41st floor, offered views of four states. In 1990 a second building was added to the plaza.
About this model
One Prudential Plaza is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
