3D print One Raffles Place
A free, printable model of One Raffles Place and the surrounding streets and buildings in Singapore, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
One Raffles Place in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 280 m
- On a 160 mm print
- 76 mm
- Scale
- 1:3,750
280 m of One Raffles Place, 76 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall tower and low podium
A very tall tower beside a low podium has long vertical edges. A layer height of 0.12–0.16 mm keeps them crisp, and printing slowly with cooling helps the upper floors.
- One piece with the ground
One Raffles Place is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. One Raffles Place takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About One Raffles Place
One Raffles Place is a Downtown Core skyscraper development in Singapore, made up of two office towers and a retail podium. Tower One is 280 m (920 ft) tall, and Tower Two has 38 stories. Tower One began as OUB Centre, planned as headquarters of Overseas Union Bank. It opened in stages, in June 1986 and December 1986, at a construction cost of S$486 million.
The original OUB Centre was designed by Kenzo Tange and SAA Architects. It had an office block and a podium block, and the podium linked underground to Raffles Place MRT station. Its office block combines reinforced concrete shear walls with a steel frame. The Business Times claimed at completion that no tower outside the United States stood taller.
Paul Noritake Tange designed Tower Two, which opened in September 2012, and the complex took the name One Raffles Place. The tower was designed to be environmentally friendly, with solar panels and rainwater collection systems, and it earned Green Mark Platinum certification from the Building and Construction Authority.
About this model
One Raffles Place is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
