3D print the Palace of Iturbide
A free, printable model of the Palace of Iturbide in Mexico City, a block-shaped building with a carved front and a roof opening, set among taller buildings and streets, generated in your browser.
-
North
-
East
-
South
-
West
The model you print
Palace of Iturbide in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Carved street front
The decorated front has small finials and relief along the roofline. The Print friendly Landmark detail setting adapts them to the print scale; Full detail suits larger prints or a fine nozzle.
- Gridded roof opening
The flat roof has a recessed panel with a thin grid. A larger print size, and a layer height of 0.12-0.16 mm, keep the grid lines crisp.
- One piece with the ground
The Palace of Iturbide is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Palace of Iturbide takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Palace of Iturbide
Madero Street #17, in the heart of historic Mexico City, is the address of the Palace of Iturbide, a large palatial residence. Miguel de Berrio y Saldívar, who held the title Count of San Mateo Valparaíso, built it between 1779 and 1785 as a wedding present for his daughter. It was meant to copy the royal palace in Palermo.
Agustín de Iturbide gave the palace its name: he lived there and, after Mexico's independence from Spain, became the First Mexican Empire's emperor, accepting the crown at the palace. He used the house as his royal palace during his reign, from 1821 to 1823. Earlier the land belonged to a convent of the Sisters of Saint Brigit, which sold it to Berrio y Saldívar.
Francisco Antonio Guerrero y Torres designed and began the Mexican Baroque building, and his brother-in-law Agustín Duran finished it. It has three floors and a mezzanine. Two fortified towers flank the front, which is faced with tezontle and cantera stone. Its carving includes flowers, small mermaids with double tails, and graceful male figures. Eighteen arches supported by Tuscan columns surround the courtyard.
About this model
The Palace of Iturbide is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





