3D print the Torre Mayor
A free, printable model of Torre Mayor in Mexico City, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Torre Mayor in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 225 m
- On a 160 mm print
- 63 mm
- Scale
- 1:3,750
225 m of the Torre Mayor, 63 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Fine floor bands
The glass face is a dense stack of thin floor bands and vertical mullions, with a flatter rear face. Print friendly adapts the fine grid; Full detail keeps the curved front face for a larger print.
- Arch and crown
The entrance arch is cut through the lower floors, and the roof carries a raised drum and helipad. A 0.12 to 0.16 mm layer height helps the arch edge and podium joints read.
- One piece with the ground
The Torre Mayor is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Torre Mayor takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Torre Mayor
Torre Mayor is an office tower in Mexico City. It stands 225 meters (738 ft) tall. Completed in 2003, it held the title of tallest building in Latin America until 2010, when the 236 m (774 ft) Ocean Two in Panama City surpassed it. Canadian businessman Paul Reichmann developed the tower and stayed a part owner up to his death in 2013.
The building was designed by the Toronto firms Zeidler Partnership Architects and Adamson Associates Architects, with structural engineering by The Cantor Seinuk Group of New York City and Enrique Martínez Romero S.A. of Mexico City. Its address is on Paseo de la Reforma, in the Cuauhtémoc district, where the Cine Chapultepec once stood; Canadian-owned Reichmann International built it. Construction began in 1999 and finished in late 2003.
Because Mexico City is prone to earthquakes, the tower includes several anti-earthquake measures. It has 96 diamond-shaped dampers, visible on its perimeter, that work like car shock absorbers to counter how the lakebed and the tower's height resonate together. With the extra bracing, the tower is nearly four times as efficient at withstanding quake forces as a conventionally damped building. In January 2003 the city was hit by a 7.6 quake; the tower came through undamaged and people inside did not notice the tremor.
About this model
The Torre Mayor is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
