3D print the Park and Tilford Building, Lenox Avenue
A free, printable model of the Park and Tilford Building, a three-story building with a decorated cornice and tall window bays, among taller neighbors, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Park and Tilford Building, Lenox Avenue in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Decorated cornice
A band of fine trim runs along the roofline above tall window bays. Print friendly adapts this detail to the print scale; Full detail keeps it on a larger print with a layer height of 0.12-0.16 mm.
- Flat roof, low height
The roof is a plain flat slab and the building is low, so the print stays small. A bigger print size helps the facade detail.
- One piece with the ground
The Park and Tilford Building, Lenox Avenue is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Park and Tilford Building, Lenox Avenue takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Park and Tilford Building, Lenox Avenue
At 310 Lenox Avenue, in Manhattan's Harlem neighborhood, stands the Park and Tilford Building, a commercial building of historic interest. Dating from 1908, it is in the Classical Revival style. A Park & Tilford grocery store originally occupied its first floor, with offices on the floors above.
The building has three stories and a full basement, and it is made of unreinforced masonry. Its exterior decoration combines white marble, limestone and terra cotta. A National Register of Historic Places listing for the building dates from May 1, 2009.
About this model
The Park and Tilford Building, Lenox Avenue is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
