3D print the Park Slope Jewish Center
A free, printable model of the Park Slope Jewish Center, a boxy building with tall arched windows and a low dome on its roof, among smaller buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Domed skylight on the roof
A low dome sits on top of the roof. Print friendly adapts its edges to the print scale; Full detail keeps them, and a layer height of 0.12–0.16 mm keeps the curve smooth.
- Arched windows and rose window
Tall arched windows and a round rose window decorate the walls. A bigger print size keeps these openings from closing up.
- One piece with the ground
The Park Slope Jewish Center is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Park Slope Jewish Center takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Park Slope Jewish Center
In South Slope, Brooklyn, at 1320 Eighth Avenue, the Park Slope Jewish Center is a synagogue that is both egalitarian and Conservative. It was established as a congregation about 1915, and it went by the name Congregation B'nai Jacob - Tifereth Israel from 1942 to 1960.
The building went up in 1925 for the Orthodox Congregation B'nai Jacob. It is a two-and-a-half-story brick building with elements of Romanesque and Baroque style. On its exterior masonry is a Star of David, and it also has a domed skylight and a rose window. In 2002 the National Register of Historic Places listed the building, and a renovation and expansion costing $1.75 million was completed in 2015.
About this model
The Park Slope Jewish Center is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
