3D print the Perelman Performing Arts Center
A free, printable model of the Perelman Performing Arts Center, a boxy building with a textured facade, and the tall World Trade Center area buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 16 mm
- Scale
- 1:3,750
16 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A boxy block with a textured skin
The building is a simple box covered in a rippled pattern. Print friendly adapts the thin pattern to the print scale; Full detail keeps it on larger prints.
- Tall neighbors on most sides
Taller buildings stand close around the center. A bigger print size and a layer height of 0.12–0.16 mm keep its small surface details clear.
- One piece with the ground
The Perelman Performing Arts Center is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Perelman Performing Arts Center takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Perelman Performing Arts Center
The Perelman Performing Arts Center is also called 6 World Trade Center. Branded PAC NYC, it houses several performance spaces and sits in the north-east corner of the World Trade Center site in Manhattan, where Vesey, Fulton and Greenwich Streets meet. Billionaire Ronald Perelman gave $75 million toward construction, and the building carries his name. Across three floors, it contains roughly 90,000 sq ft (8,400 m2). It opened on September 13, 2023.
The Lower Manhattan Development Corporation first announced plans for the center in 2004, as part of rebuilding after the September 11 attacks. The original designers were Gehry Partners LLP and Snøhetta, but plans stalled repeatedly and were scrapped later. In 2015 Joshua Ramus and Davis Brody Bond became the architects, with Magnusson Klemencic Associates as structural engineer.
The temporary entrance of the PATH train's World Trade Center station sat within the site's footprint, and its demolition in August 2016 allowed construction of the center. Perelman made his donation on June 29, 2016, and the center was renamed for him. In August 2017 work began below ground, and the above-ground frame followed in 2020.
About this model
The Perelman Performing Arts Center is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
