A white 3D print of the Pisa Baptistery, a round building with rows of arches, pointed gables and a ribbed dome, standing on green lawns with buildings and a wall nearby.

3D print the Pisa Baptistery

A free, printable model of the Pisa Baptistery with the green lawns and nearby buildings around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Pisa Baptistery model, North view North
  • Pisa Baptistery model, East view East
  • Pisa Baptistery model, South view South
  • Pisa Baptistery model, West view West

© OpenStreetMap contributors

The model you print

Pisa Baptistery in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

Real height
55 m
On a 160 mm print
15 mm
Scale
1:3,750

55 m of the Pisa Baptistery, 15 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Ring of pointed gables

    A ring of small pointed gables sits above the arcades, below the dome. Print friendly adapts them to the print scale; a bigger print or Full detail keeps more of them.

  2. Dome with a small cap

    The ribbed dome ends in a small cap at the top. A layer height of 0.12-0.16 mm keeps the curve smooth, and slow printing with cooling helps the tip.

  3. One piece with the ground

    The Pisa Baptistery is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Pisa Baptistery takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Pisa Baptistery

The Pisa Baptistery of St. John is a Catholic religious building in the Italian city of Pisa. Construction started in 1152 under Diotisalvi, who signed and dated the work, to replace an older baptistery. Work was finished in 1363, in a Gothic manner. The baptistery belongs to the Piazza dei Miracoli, a World Heritage Site and architectural ensemble that also includes the Camposanto, the Duomo di Pisa and its campanile, the Leaning Tower of Pisa.

It is 54.86 meters high and 34.13 meters in diameter, which makes it the largest baptistery in Italy. Over 200 years its style moved from Romanesque to Gothic: the lower parts have round arches and plain figural carving, while the upper sections have pointed wimpergs and richly figurative decoration. Its walls are bichromatic Carrara marble banded with horizontal lines of bluish-gray stone, the same as the cathedral and the campanile.

The east portal, probably from around 1200, faces the cathedral facade. Each inner jamb of the portal carries eleven figurative reliefs in Byzantine style. The arch has three stepped-back archivolts, with medallions of the Twenty-Four Elders and the Lamb of God at the keystone. The lower tier of the architrave shows episodes from the life of the baptistery's natural patron, St. John the Baptist.

About this model

The Pisa Baptistery is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits