A white 3D print of Santa Maria della Spina, a small ornate Gothic church with three slender spires and many pinnacles, standing between a street and the water.

3D print Santa Maria della Spina

A free, printable model of Santa Maria della Spina, a small Gothic church with slender spires, set between a street and the water in Pisa, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Santa Maria della Spina model, North view North
  • Santa Maria della Spina model, East view East
  • Santa Maria della Spina model, South view South
  • Santa Maria della Spina model, West view West

© OpenStreetMap contributors

The model you print

Santa Maria della Spina in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
4 mm
Scale
1:3,750

4 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Slender spires and tiny pinnacles

    Three tall, thin spires and many small pinnacles crown this very small church. Print it as large as your bed allows, slowly, with a layer height of 0.12–0.16 mm.

  2. Detail setting at small sizes

    At a small print size, Print friendly adapts the tiniest pinnacles and arches to the scale. Full detail keeps every modeled feature, which pays off with a larger print or a fine nozzle.

  3. One piece with the ground

    Santa Maria della Spina is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Santa Maria della Spina takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Santa Maria della Spina

Santa Maria della Spina, in Pisa, Italy, is a compact church dating from around 1230, built in the Pisan Gothic manner and enlarged after 1325. At first it was called Santa Maria di Pontenovo, after a newer bridge nearby that fell down in the 15th century and was not replaced. The name della Spina, meaning "of the thorn", refers to a thorn said to come from the crown of thorns that was set on Christ, a relic brought to the church in 1333.

The church was taken apart in 1871 and reassembled at a higher level, because water from the Arno river was seeping in dangerously. It was altered in the process, and John Ruskin, visiting Pisa in 1872, was outraged by the restoration. The city has always administered the church, apart from brief spells in two short periods of the seventeenth and eighteenth centuries, when the local hospital was responsible for it.

The building is rectangular in plan and made of marble laid in polychrome bands. Cusps, tympani and tabernacles mark its exterior, along with rich sculptural decoration that includes rose windows and many statues by leading Pisan artists of the early 14th century. The south façade carries thirteen statues showing the Apostles and Christ, from Lupo's workshop, while high pyramid-like spires end in statues of the Madonna with Child by Nino Pisano. The interior is a single, much simpler room.

About this model

Santa Maria della Spina is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits