3D print PS 66, Queens
A free, printable model of P.S. 66 and the blocks of Richmond Hill around it, with a hillside to one side, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tower, belfry and arches
The off-center tower with its belfry and the round window arches are the smallest details. A larger print size or Full detail keeps them; Print friendly adapts them for a small print.
- One piece with the ground
PS 66, Queens is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. PS 66, Queens takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About PS 66, Queens
In Richmond Hill, Queens, New York, stands P.S. 66, a historic school building that carries the formal name Brooklyn Hills School and also goes by Jacqueline Kennedy Onassis School. C. B. J. Snyder, who lived from 1860 to 1945, was the architect, and the school went up in 1898.
It is a brick building in the Romanesque style, two and a half stories high, with a prominent off-center tower and a belfry. It has a slate roof and a decorative stucco frieze. Prominent round arches highlight its window openings, giving the school a fortress-like look, and its distinctive tower is six stories tall.
The school was restored in 2001. It is also a relic of an earlier era, when Richmond Hill, then a farming community, was becoming an urban residential neighborhood. The National Register of Historic Places listed it in 2003. Caroline Kennedy asked the New York City Council in 2008 to name it a city landmark, and it became one in 2010.
About this model
PS 66, Queens is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
