3D print the Queens Plaza Court Building
A free, printable model of the Queens Plaza Court Building, an L-shaped office building with a lattice sign frame on its roof, among taller buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 14 mm
- Scale
- 1:3,750
14 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Rooftop sign frame
A thin lattice frame stands on the roof. Print friendly adapts thin parts like this to the print scale; Full detail keeps every strut on a larger print. Printing slowly helps the fine bars.
- Many small windows
Rows of windows cover the facades. A layer height of 0.12-0.16 mm and a bigger print size keep them crisp.
- One piece with the ground
The Queens Plaza Court Building is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Queens Plaza Court Building takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Queens Plaza Court Building
The Queens Plaza Court Building, also called 28-11 Queens Plaza North, is an office building in Long Island City, Queens, at Queens Plaza North and 29th Street. Among the earliest office buildings on Queens Plaza, it was completed in 1912, in an area that later grew into a financial and commercial district. Its original tenants were the Queens Chamber of Commerce and the Long Island City Savings Bank.
The nine-story building is Italianate in style. The original 1912 section has four stories and a terracotta and limestone facade; five more stories with a tan-brick exterior were added in 1927. The front has seven bays of recessed windows, with arched windows on the eighth floor above them, and neoclassical marble columns frame the main entrance. A steel and concrete frame carries it, and the original foundation was designed to support extra floors. A large billboard sign stands on the roof. An addition on 29th Street, finished in 1953, runs northward for seven stories and gives the building an L-shape.
Consolidated Edison used the building for regional offices from 1920. During World War II it was used as Army barracks, and afterward it served as the Queens offices of Pan Am. New York City began using it in 1964 and bought it in 1974. It holds offices for the Department of Education and the Department of Transportation, including a Traffic Management Center that monitors traffic and controls traffic signals across the city.
About this model
The Queens Plaza Court Building is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
