3D print the Rescue Hook & Ladder Company No. 1 Firehouse
A free, printable 3D model of the Rescue Hook & Ladder firehouse in Roslyn and its surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Rescue Hook & Ladder Company No. 1 Firehouse in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Small roof and trim details
A Colonial Revival firehouse carries modest trim that can vanish at small print sizes. Print friendly adapts small details to the print scale; Full detail keeps them on larger prints with a 0.12–0.16 mm layer height.
- One piece with the ground
The Rescue Hook & Ladder Company No. 1 Firehouse is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Rescue Hook & Ladder Company No. 1 Firehouse takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Rescue Hook & Ladder Company No. 1 Firehouse
In Roslyn, a village in Nassau County, New York, stands a historic fire station built for a rescue hook and ladder company. The fire department dates from November 1, 1852, but the Colonial Revival building went up in 1937. It was designed by Henry W. Johanson, a prominent architect based in Roslyn.
The firehouse was later sold, repurposed and renovated. A newer firehouse for the company, dedicated in 1986, contains five fire trucks and larger equipment. The company's volunteer firefighters have claimed several championships in competitions with other firehouses. The older building's listing on the National Register of Historic Places dates to May 6, 1991.
About this model
The Rescue Hook & Ladder Company No. 1 Firehouse is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
