3D print the Roslyn Grist Mill
A free, printable model of the Roslyn Grist Mill, a steep-roofed timber mill beside a larger neighboring building, shown with the water and roads nearby, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Fine siding and small openings
The vertical siding texture and small windows are the finest details, and they shrink at print scale. Print friendly adapts them; Full detail at a larger size keeps more.
- One piece with the ground
The Roslyn Grist Mill is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Roslyn Grist Mill takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Roslyn Grist Mill
The Roslyn Grist Mill, a historic gristmill, sits on Old Northern Boulevard in the Incorporated Village of Roslyn, in New York's Nassau County. It dates from some time before the mid-18th century. Few Dutch colonial commercial frame buildings survive in the United States, and this is one of them. It earned a place on the national and state registers of historic places in 1986.
The mill is a two-and-a-half-story rectangular building, about 15.39 m (50 feet 6 inches) in length and 25 feet (7.6 m) in width. Its original timber frame of post-and-beam bents tied together with sills and wall plates differs from the traditional European grid pattern and is covered in weatherboard. A one-and-a-half-story wing lies to the west, above the race, and a mill pond to the north eventually drains to Long Island Sound.
John Robeson built a gristmill there in the 18th century's first decade. The current mill is believed to be the work of Jeremiah Williams, between 1715 and 1741. Hendrick Onderdonk, already the operator of two paper mills, acquired it in 1758. George Washington visited in 1790 and mentioned the mill in his diary. The Hicks family ran it as a working mill up to 1916, then made it a tea house and museum, a use that lasted until 1975.
About this model
The Roslyn Grist Mill is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
