3D print Roy Thomson Hall
A free, printable model of Roy Thomson Hall and the surrounding streets and buildings of downtown Toronto, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Roy Thomson Hall in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
9 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Smooth curves
Curved walls print smoothest with a layer height of 0.12–0.16 mm. Full detail at a larger print size keeps more of the small features, while Print friendly suits a small print.
- One piece with the ground
Roy Thomson Hall is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Roy Thomson Hall takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Roy Thomson Hall
Roy Thomson Hall is a Toronto concert hall in Ontario, Canada. It sits in the entertainment district of downtown Toronto, and the Toronto Symphony Orchestra and the Toronto Mendelssohn Choir call it home. The hall opened in 1982, and its circular design has a sloping, curvilinear glass exterior. Arthur Erickson and Mathers and Haldenby, both Canadian, designed it, with Itzhak Perlman advising them on accessibility for guests and performers with disabilities. The hall seats 2,630 and has a pipe organ built by Gabriel Kney of London, Ontario.
During construction the hall was known as The New Massey Hall. On January 14, 1982, it took its official name in gratitude to Roy Thomson's family (Thomson founded the Thomson Corporation publishing empire), a donor of C$4.5 million toward completing the fundraising. Musicians had complained about the acoustics for years, and the hall was renovated over six months in 2002. Erickson described the gray structure as a container that people were meant to fill with their own decorations, and the pond was originally designed to serve as a skating rink in winter.
The Toronto International Film Festival uses the hall as a main venue, and many gala screenings take place there each year. The 2000 film X-Men was partly shot there, and the television series The Expanse casts it as the United Nations headquarters. On August 27, 2011, the hall held the state funeral for Jack Layton, who led the NDP and was federal Leader of the Official Opposition.
About this model
Roy Thomson Hall is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
