3D print Saint Mary's Chapel, Carle Place
A free, printable model of Saint Mary's Chapel and the quiet streets around it in Carle Place, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Steep roof and tiny belfry
The steep gable roofs carry fine roof lines, and a small belfry sits near one end. Print friendly protects the belfry at small sizes; Full detail on a larger print keeps the roof texture and half-timbering.
- One piece with the ground
Saint Mary's Chapel, Carle Place is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Saint Mary's Chapel, Carle Place takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Saint Mary's Chapel, Carle Place
A historic Episcopal church stands on Rushmore Avenue in Carle Place, Nassau County, New York, between Roslyn and Glen Cove Avenues. Its two names are Saint Mary's Chapel and Saint Mary's Episcopal Church. The building dates to 1926.
Built in 1926, the chapel is a rectangular building of one story in the Tudor Revival style. Its gable roof is steeply pitched, and the eaves are low. Half-timbering decorates the stucco walls, and a small vestibule juts out from the front. The state register of historic places added it in 1999, and the National Register of Historic Places followed in 2005.
About this model
Saint Mary's Chapel, Carle Place is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
