3D print San Crisogono
A free, printable 3D model of San Crisogono in Rome and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
San Crisogono in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 12 mm
- Scale
- 1:3,750
12 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Church with a bell tower
A bell tower is a tall, thin part of a church model. Print friendly adapts thin parts to the print scale; Full detail keeps every modeled feature on a larger print.
- One piece with the ground
San Crisogono is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. San Crisogono takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About San Crisogono
Basilica di San Crisogono, dedicated to Saint Chrysogonos, is both a titular church and a minor basilica in Rome's Trastevere district. It was set up in the 4th century, in the time of Pope Sylvester I, and ranks among Rome's oldest parish churches. It is first mentioned, as Titulus Chrysogoni, among the signatures to the Roman Synod of 499. Cardinal Scipione Borghese oversaw the reconstruction that produced the present basilica in the early 17th century. Its Baroque interior stands out, as do the remains of an early Christian church beneath the crypt.
Pope Gregory III restored the church in 731 and also founded a monastery. John of Crema rebuilt it in 1123, and Giovanni Battista Soria did so again in 1626 with money from Scipione Borghese. The bell tower comes from the 12th-century rebuilding. The nave has 22 granite columns reused from antiquity, and the floor is cosmatesque. The high altar is from 1127.
Guercino painted the Glory of Saint Chrysogonus at the center of the Baroque coffered ceiling, although the work there is probably a copy of the original. Blessed Anna Maria Taigi, a Christian mystic beatified in 1920, has a shrine along the nave's left.
About this model
San Crisogono is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
