3D print San Pancrazio
A free, printable 3D model of San Pancrazio and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
San Pancrazio in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Plain walls, small features
A church with plain walls relies on its overall shape. A larger print size keeps small details, and Print friendly detail suits smaller prints.
- One piece with the ground
San Pancrazio is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. San Pancrazio takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About San Pancrazio
San Pancrazio is a Catholic minor basilica in Rome, Italy, and serves as a titular, conventual and parish church. Pope Symmachus founded it in the 6th century. It covers the Catacomb of San Pancrazio and stands along via S. Pancrazio, past the Porta San Pancrazio to the west, a gate that opens in the Aurelian Wall on the Janiculum. Discalced Carmelites have occupied the adjacent convent since 1662.
Pope Symmachus (498–514) built the basilica over the spot where Saint Pancras of Rome, a young martyr, was buried. A larger church followed in the seventh century, when Pope Honorius I (625–638) responded to growing numbers of pilgrims and put the saint's relics under the high altar. The Discalced Carmelites received the church in the 17th century and remodeled it entirely. It was rebuilt again in the 19th century, after heavy damage in 1849, when France attacked the incipient Roman Republic.
The facade, plain brick from the late 15th century, still carries the arms of Pope Innocent VIII. Large catacombs lie beneath the church, known both as the Catacomb of San Pancrazio and as di Ottavilla. The entrance stands beside the small Museo di S. Pancrazio, whose exhibits include sculpture fragments along with pagan and early Christian inscriptions.
About this model
San Pancrazio is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
