3D print St. Bartholomew's Church and Rectory
A free, printable model of St. Bartholomew's Protestant Episcopal Church with its rectory, shown with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
St. Bartholomew's Church and Rectory in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tower cap and small porches
The tower's louvered cap and the two small porches at its base are the smallest parts. Print friendly adapts them to the print scale; Full detail keeps them, best with a larger print.
- Tight lot between taller buildings
The church and rectory sit among taller neighboring buildings, so a larger print size helps the gables and rooflines stay clear.
- One piece with the ground
St. Bartholomew's Church and Rectory is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. St. Bartholomew's Church and Rectory takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About St. Bartholomew's Church and Rectory
The Episcopal church of St. Bartholomew and its rectory stand together on Pacific Street in Crown Heights, Brooklyn, New York, at number 1227, just east of Bedford Avenue. Built in 1886, the complex follows the Romanesque Revival style, and George Poole Chappell is named as its architect. Its walls are brick with stone trim, and a slate roof covers it.
The church has a squat, battered stone tower capped by an ogival roof of tile. The rectory beside it is a two story building of brick and stone with twin gables and an ogival tower of its own. In 1980 it gained a place in the National Register of Historic Places.
About this model
St. Bartholomew's Church and Rectory is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
