3D print St. Josaphat Cathedral
A free, printable model of St. Josaphat Cathedral in Edmonton and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
St. Josaphat Cathedral in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Roofs and small details
Print friendly adapts small, closely set details to the print scale; Full detail keeps every modeled feature on larger prints. A layer height of 0.12–0.16 mm keeps fine vertical detail crisp.
- One piece with the ground
St. Josaphat Cathedral is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. St. Josaphat Cathedral takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About St. Josaphat Cathedral
This Ukrainian Catholic cathedral stands in McCauley, Edmonton, Alberta, and its architecture is counted among the best Canadian examples of the Byzantine Rite church style. It is where the Ukrainian Catholic Eparchy of Edmonton has its seat, and it has held cathedral status since 1948. It occupies 18 city lots. Heritage descriptions point to its seven domes, its columned entry portico, and a red brick exterior veneer trimmed with pilasters of darker brick and crosses of cream-colored inlay.
Rev. Philip Ruh, an Oblate missionary who came from Belgium, designed the present building in 1938 after intensively studying the Byzantine Rite church designs of Ukraine. His design mixes Ukrainian Baroque with Western European influences, a combination dubbed the Prairie Cathedral style. Height restrictions near the Edmonton City Centre Airport kept it from being at least 4–5 m taller. Construction lasted from 1939 to 1947. Interior murals and icons began in 1951 under Julian Bucmaniuk, and the iconostasis was built in 1968.
About this model
St. Josaphat Cathedral is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
