3D print St. Patrick's Church, Staten Island
A free, printable model of St. Patrick's Church in Richmondtown, a church with a tall slender steeple, shown with the surrounding streets and small buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
St. Patrick's Church, Staten Island in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
9 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall slender steeple
The steeple and its small cross are tall and thin, the most delicate part of the model. Print friendly adapts them to the print scale; Full detail keeps them as modeled, best printed slowly with good cooling.
- Arched windows along the nave
A row of small arched windows runs along the long nave walls. A larger print size and a 0.12 mm layer height keep them crisp.
- One piece with the ground
St. Patrick's Church, Staten Island is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. St. Patrick's Church, Staten Island takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About St. Patrick's Church, Staten Island
St. Patrick's Church, in Richmondtown on Staten Island in New York City, is a parish church of the Archdiocese of New York, which is Roman Catholic. It began in 1862 at the county seat as a mission church of St. Joseph's in Rossville, which made it Staten Island's fifth Catholic church. Its early Romanesque Revival building went up that same year, with a steeple following in 1898.
Before the church was built, a priest from Rossville, John Barry, who became the founding pastor, served the local Catholic community, as did James Roosevelt Bayley, who later became an archbishop. The parish became independent in 1884. From 1914 to 1922 it set up four Staten Island missions, St. Margaret Mary, St. Clare, St. Charles and Our Lady Queen of Peace, that all grew into independent parishes. New York City's Landmarks Preservation Commission declared the church an official city landmark on February 20, 1968.
About this model
St. Patrick's Church, Staten Island is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
