3D print the Steinway Mansion
A free, printable model of the Steinway Mansion, with its tower and porches, and the larger buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tower and rooftop cupola
The square tower carries a small eight-sided cupola and rows of tiny arched openings. Full detail keeps them on a larger print; Print friendly simplifies them at small sizes.
- Brackets, porches and railings
Many small brackets run under the eaves, and the porches have balustrades. A layer height of 0.12–0.16 mm keeps these repeating details crisp.
- One piece with the ground
The Steinway Mansion is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Steinway Mansion takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Steinway Mansion
Also called the Benjamin Pike Jr. House, the Steinway Mansion is an Italianate and Renaissance Revival villa at 18-33 41st Street in Astoria, Queens, New York City. Benjamin Pike Jr., who made scientific instruments in Manhattan, built it between 1857 and 1858 as a 27-room summer residence, at a cost of $85,000. It originally stood on a 70-acre estate beside Long Island Sound.
William Steinway of Steinway & Sons bought the mansion in 1870. He later enlarged his Queens property to 440 acres and built the Steinway Piano Factory there, along with Steinway Village, a company town designed to be self-sufficient. The village had housing for workers, a church, a library and a kindergarten.
Jack Halberian, an Armenian-Turkish immigrant, acquired the property in 1926, and his family kept the house for over 80 years. The city designated it a landmark in 1967. In 1983, the National Register of Historic Places listed it. Few 19th-century villas remain in Queens, and this is regarded as one of them.
About this model
The Steinway Mansion is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
