3D print Sungnyemun (Namdaemun)
A free, printable model of the gate with its stone base, arched passage and two-tiered curved roof, on its green island among Seoul's roads and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Sungnyemun (Namdaemun) in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Sweeping upturned eaves
The two roof tiers curve upward at the corners, with tiny ornaments along the eaves. The gate is a small model, so use Full detail or a larger print to keep them, and a 0.12 mm layer height for crisp roof edges.
- Stone base and arch
A brick-patterned stone base carries an arched passage under the wooden upper floors. Fine layers around 0.12–0.16 mm keep the brick lines and the arch opening clean.
- One piece with the ground
Sungnyemun (Namdaemun) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Sungnyemun (Namdaemun) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Sungnyemun (Namdaemun)
Sungnyemun, also called Namdaemun or the South Great Gate, is the south gate among the Eight Gates of Seoul. It formed part of the Seoul City Wall, which marked the original limits of the city in the Joseon period. The gate sits in Seoul's Jung District, close to Seoul Station and Seoul Plaza, and the historic Namdaemun Market is beside it.
Wood and stone make up the gate, topped by a tiled roof in two tiers shaped like a pagoda. Construction began in 1395 and finished in 1398, and the gate was rebuilt in 1447. It was used to greet foreign emissaries and to control access to the capital. It was designated South Korea's first National Treasure on December 20, 1962.
Until 2008, Sungnyemun was Seoul's oldest wooden structure, and then arson severely damaged the wooden pagoda on top of the gate. The fire broke out on February 10, 2008. Work to restore it began in February 2010 and ended on April 29, 2013; the whole restoration period lasted five years.
About this model
Sungnyemun (Namdaemun) is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





