3D print Sunnyslope, Bronx
A free, printable model of Sunnyslope, a steep-roofed house, and the buildings and streets around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Steep gables and chimneys
Steep gables, small dormers and several chimneys give the roofline many thin points. Print friendly adapts them to the print scale; Full detail keeps them on a larger print.
- One piece with the ground
Sunnyslope, Bronx is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Sunnyslope, Bronx takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Sunnyslope, Bronx
Sunnyslope stands in the South Bronx neighborhood of Hunts Point, in New York City. Peter Hoe, whose brother was Richard March Hoe, built the house about 1860 on the Hoe family estate. It is a two-and-a-half-story house in the Gothic Revival style, designed in the Picturesque mode.
In 1919 the house was sold to Temple Beth Elohim. Later it housed an African Methodist Episcopal congregation, and after that Bright Temple A.M.E. Church. New York City made it a Landmark in 1981, and it earned a National Register of Historic Places listing in 1983.
About this model
Sunnyslope, Bronx is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
