3D print Temple Emanu-El, Staten Island
A free, printable model of Temple Emanu-El, a low synagogue with a ribbed dome and a small columned porch, shown among the houses and larger buildings of its street, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Dome and small star
The dome sits on an octagonal drum and carries a small Star of David on top. Print friendly keeps the thin top printable; Full detail at a larger size keeps the drum ribs sharp.
- One piece with the ground
Temple Emanu-El, Staten Island is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Temple Emanu-El, Staten Island takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Temple Emanu-El, Staten Island
Port Richmond, on Staten Island in New York City, is home to Temple Emanu-El, a Conservative synagogue. Pelcher and Zobel designed it, and it was built in 1907. Its National Register of Historic Places listing dates from 2007. The building is wooden, with clapboard siding, in a Classical Revival design.
The front porch has a pediment and rests on a pair of columns, a design echoed inside in the Torah Ark. A dome tops the modest building, sitting on an octagonal drum and carrying a Star of David. Painted gold at first, the dome reportedly could be seen from miles away.
About this model
Temple Emanu-El, Staten Island is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
