3D print Théâtre des Champs-Élysées
A free, printable model of the Théâtre des Champs-Élysées and the surrounding streets and buildings of Paris, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Théâtre des Champs-Élysées in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
9 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Fine facade detail
A larger print size and Full detail keep small facade features, while Print friendly suits a small print. A layer height of 0.12–0.16 mm keeps edges and curves smooth.
- One piece with the ground
Théâtre des Champs-Élysées is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Théâtre des Champs-Élysées takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Théâtre des Champs-Élysées
The Théâtre des Champs-Élysées stands at 15 avenue Montaigne in Paris, and it is named for the nearby Avenue des Champs-Élysées. The main hall holds as many as 1,905 people; the Comédie and the Studio des Champs-Élysées, smaller halls above it, hold 601 and 230. Impresario Gabriel Astruc commissioned the building, and it went up between 1911 and 1913 to plans by the brothers Auguste and Gustave Perret, who worked from Henry van de Velde's scheme. It is the city's first example of Art Deco architecture.
Its reinforced concrete walls are plain and rectilinear, with marble and stucco plaques fixed to the outside as ornament. At the time it was shockingly plain, a sharp break with Art Nouveau. Concrete was needed because of the subsoil and the site's closeness to the Seine. Antoine Bourdelle made the exterior bas relief, Maurice Denis the dome and Ker-Xavier Roussel the stage curtain. France has classified the building as a monument historique since 1957.
The venue opened on April 2, 1913. Within two months of its inauguration, it was the setting for the first performance ever of Rite of Spring, as staged by the Ballets Russes, which set off a riot that is counted among the most famous in classical music. The Orchestre Lamoureux and the Orchestre National de France are based there, and the Vienna Philharmonic Orchestra uses it as a French base. The Caisse des Dépôts et Consignations has owned the building since 1970.
About this model
Théâtre des Champs-Élysées is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
