3D print Théâtre Saint-Denis
A free, printable 3D model of Théâtre Saint-Denis and the surrounding streets and buildings of Montreal, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Théâtre Saint-Denis in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Street-front theater building
A city theater is a compact block with fine facade detail. Use Full detail on a larger print to keep the facade, or Print friendly for a sturdier small print.
- One piece with the ground
Théâtre Saint-Denis is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Théâtre Saint-Denis takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Théâtre Saint-Denis
Théâtre Saint-Denis stands in Montreal's Quartier Latin, on Saint Denis Street, in Quebec. Anglin-Norcross Ltd. built it in 1915 as a movie theater. Its mission changed in the 1980s, and since then the venue has concentrated solely on the performing arts. It stages musicals, plays and music concerts, and the Just for Laughs festival brings numerous stand-up comedy shows to it.
The venue is split into two halls, known as St-Denis 1 and St-Denis 2. Hall 1 holds 2,218 seats, 1,328 at floor level and 890 up on the balcony. Hall 2 holds 933 seats, 665 at floor level and 268 on the balcony. Both halls therefore offer seating on two levels.
About this model
Théâtre Saint-Denis is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
