3D print the Tour de la Bourse
A free, printable 3D model of the tower and its surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Tour de la Bourse in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 190 m
- On a 160 mm print
- 52 mm
- Scale
- 1:3,750
190 m of the Tour de la Bourse, 52 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall tower, slow printing
A tall tower puts a lot of height on a small footprint. Print slowly and keep the cooling on so the upper floors stay clean.
- Facade detail and layer height
A layer height of 0.12–0.16 mm keeps vertical lines crisp. Full detail suits a larger print, while Print friendly adapts thin parts for small prints.
- One piece with the ground
The Tour de la Bourse is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Tour de la Bourse takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Tour de la Bourse
In Montreal, Quebec, the Tour de la Bourse (meaning Stock Exchange Tower) rises 48 stories. It stands in the International Quarter, where Victoria Square meets Saint Jacques Street, and the underground city links it to Metro station Square-Victoria-OACI. At 190 m (620 ft), it held the title of tallest reinforced concrete tower in the world until Lake Point Tower in Chicago was finished in 1968.
Completed in 1964, it was Canada's tallest building until the Toronto-Dominion Centre surpassed it in 1967. Luigi Moretti and Pier Luigi Nervi designed it in the International Style. The original project called for three identical towers arranged in a triangle, but financial constraints meant only one was built.
Its facade, fully renovated in 1995, pairs an anodized aluminum curtain wall tinted bronze with pre-cast concrete columns, slightly slanted, at each of the four corners, which gives the tower a subtly convex look. Mechanical floors divide it into three roughly equal blocks, and the corners of those floors are recessed in an octagonal shape. The Montreal Exchange is the anchor tenant, on floors 3 and 4. In March 2010 the artist Aude Moreau lit the rooms on its upper levels to spell "Sortir" across the facades.
About this model
The Tour de la Bourse is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
