3D print Tremont Baptist Church
A free, printable model of a church with a tall square corner tower and a high-pitched gabled roof, with taller buildings and streets around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall corner tower
The slim square tower is taller than the church and ends in a notched top. Print friendly adapts thin parts to the print scale; Full detail keeps them on a larger print.
- One piece with the ground
Tremont Baptist Church is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Tremont Baptist Church takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Tremont Baptist Church
Tremont Baptist Church is a historic Baptist church in the Bronx, part of New York City. Its address is 324 East Tremont Avenue. Construction happened in two stages, from 1904 until 1912, and the church is in the Late Gothic Revival style. The National Register of Historic Places added it in 2009.
The church has a single story over a raised basement. It is 50 feet tall, with an offset corner tower that is 75 feet tall. Its facing is gray marble. Pointed arches frame its doors and windows, and the roof is high-pitched and gabled. Buttressed bays and stained-glass windows complete the design.
About this model
Tremont Baptist Church is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
