3D print the Upper Belvedere
A free, printable model of the Upper Belvedere with its domed corner pavilions, set in the formal garden paths and basins around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Upper Belvedere in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Small domed corner pavilions
Four small domes cap the corner pavilions, with fine window and pilaster detail along the long facades. A bigger print size keeps the domes rounded, and layers of 0.12 to 0.16 mm keep the facade relief crisp.
- Low, long palace
The palace is long and low against a wide garden. Print friendly adapts the small roof and window details to the print scale; Full detail keeps every modeled feature on large prints.
- One piece with the ground
The Upper Belvedere is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Upper Belvedere takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Upper Belvedere
The Upper Belvedere is one of two Baroque palaces in the Belvedere complex in Landstraße, Vienna's third district, on the south-eastern edge of the historic center. The complex served Prince Eugene of Savoy as a summer residence and was designed mainly by Johann Lukas von Hildebrandt. Work on the Upper Belvedere started in the late 1710s and ended in 1723, and the palace was meant more for ceremonies and receptions than as a private home.
In 1719, with the interior decoration still under way, Eugene received the Turkish ambassador Ibrahim Pasha there. Carlo Innocenzo Carlone painted the ceiling fresco of the Marble Hall between 1721 and 1723, and during the winter of 1732–33 Hildebrandt gave the Sala Terrena a vaulted ceiling carried by four Atlas pillars. A formal French garden by Dominique Girard runs down three terraces to the Lower Belvedere.
In 1776 Maria Theresa and Joseph II decided to move the Imperial Picture Gallery into the palace, and the gallery is often called one of the first public art museums anywhere in the world. From 1896 it was the official residence of Archduke Franz Ferdinand. The Upper Belvedere holds the museum's permanent collection of Austrian art, is pictured on Austria's 20-cent euro coin, and is part of the Historic Centre of Vienna World Heritage Site.
About this model
The Upper Belvedere is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





