3D print Voorlezer's House
A free, printable model of the Voorlezer's House on Staten Island, with the road and green open ground around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Voorlezer's House in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A small house, so go larger
This is a small building, so its fine details are tiny at the default size. A larger print and a layer height of 0.12–0.16 mm keep more of them; Full detail keeps every modeled feature.
- One piece with the ground
Voorlezer's House is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Voorlezer's House takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Voorlezer's House
The Voorlezer's House, a historic frame house with clapboard siding, stands in Historic Richmond Town on Staten Island, New York. It was once regarded as the earliest schoolhouse known in the present-day United States. Tradition dates it to before 1696 and places it on land patented in 1680, but it most likely dates from the middle of the eighteenth century, probably the 1760s, when Jacob Rezeau, whose family had taken over the property in 1705, probably built it.
The house was lived in as a private home for over a century. By 1936 it had fallen into disrepair and faced demolition, until the museum acquired it in 1939 and restored it to the look it was thought to have had at the start of the eighteenth century. Visitors were first admitted on April 14, 1942, and again on June 27, 1985, after a second restoration. In 1961 it was designated a National Historic Landmark, and it entered the National Register of Historic Places in 1966, the year that registry was created.
The house is an example of Dutch-influenced vernacular architecture. The roof is pitched unequally, because the front stands 2 feet (0.61 m) taller than the back. Its foundation is built of undressed field stone in walls 2 feet (0.61 m) in thickness, and the timbers, oak or white wood, were shaped with a broadaxe. At the northeast end sits a massive chimney of stone and brick.
About this model
Voorlezer's House is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
