3D print W Las Vegas
A free, printable model of W Las Vegas, a slab hotel tower with vertical window strips and a frame jutting from its roof, beside a large building, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About W Las Vegas
The luxury suite hotel W Las Vegas sits within the Mandalay Bay resort complex in Paradise, Nevada, along the Las Vegas Strip. MGM Resorts International owns and operates it under Marriott International's W Hotels brand. The tower has 43 stories, and its gold-paned exterior matched the main resort at opening, though the interior design was entirely different.
The Mandalay Resort Group announced the tower on May 23, 2002, as an all-suite hotel tower connected to its Mandalay Bay resort, aimed at attendees of the Mandalay Bay Convention Center. The structure topped out on October 17, 2003, and the hotel opened under the name THEhotel at Mandalay Bay on December 17, 2003. It had no gambling but gave access to the nearby Mandalay Bay casino, and its standard suites were the largest in Las Vegas, at 725 sq ft (67.4 m²).
MGM announced on August 6, 2012, that THEhotel would become Delano Las Vegas, in a partnership with Morgans Hotel Group. Construction began in April 2014, with only a few floors worked on each week to avoid major room closures. The renovations cost $80 million and mostly took place inside the tower, which kept its gold appearance. Delano Las Vegas officially opened on September 2, 2014. On December 18, 2024, it took the name W Las Vegas, under MGM and Marriott International.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 40 mm | 1:3,750 |
| 200 mm | 50 mm | 1:3,000 |
| 256 mm | 64 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Jutting rooftop frame
- A thin open frame juts out sideways from the roof. Print slowly with good cooling, and use Print friendly to adapt it to the print scale; Full detail keeps it for larger prints.
- Window strips and lettering
- Narrow vertical strips and a W lettering band mark the facade. Layers of 0.12–0.16 mm keep them crisp, and a larger print size keeps the lettering readable.
- One piece with the ground
- W Las Vegas is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. W Las Vegas takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
W Las Vegas is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a W Las Vegas STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. W Las Vegas grows with the print: about 40 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
